TITLE: HP Workstation xw6000 Broadcom 5702 LAN Boot Code Firmware VERSION: 2.35 Rev. A DESCRIPTION: This contains BCM5702 Boot Code Firmware to support Broadcom 5702-based NICs and LAN-on-motherboard in the workstations listed. PURPOSE: Recommended SOFTPAQ NUMBER: SP25730 SUPERSEDES: None EFFECTIVE DATE: November 10, 2003 CATEGORY: Firmware SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw6000: All Models OPERATING SYSTEM(S): Windows 2000 Windows XP Professional LANGUAGE(S): Global ENHANCEMENTS: N/A PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file and follow the on-screen instructions to unpack the files. 3. Copy the following unpacked files to a DOS-bootable diskette: - AUTOEXEC.BAT - DIAGCFG.BIN - b57udiag.exe - EE5702C2.35A 4. Place the diskette created above in the diskette drive of the hp workstation xw6000 to be updated. 5. Restart the workstation, allowing it to boot from the diskette. 6. The AUTOEXEC.BAT file on the diskette will execute at startup and you will see a series of reading/writing messages. The last message displayed is "Upgrading bootcode from 2.24 to 2.35". When complete, the A:\ prompt will appear. 7. Remove the diskette and restart the workstation. Copyright (c) 2004 Hewlett-Packard Development Company, L.P.