TITLE: HP Driver CD for Red Hat Enterprise Linux 3 VERSION: A Rev. 0 DESCRIPTION: This contains the Linux Enablement for RHEL WS 3 for the workstations listed below. PURPOSE: Routine SOFTPAQ NUMBER: SP27161 SUPERSEDES: None EFFECTIVE DATE: February 6, 2004 CATEGORY: Utility - Tools SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw4100: All Models HP Workstation xw6000: All Models HP Workstation xw8000: All Models OPERATING SYSTEM(S): RH Ent Linux 3 (IA32) LANGUAGE(S): Global ENHANCEMENTS: N/A PREREQUISITES: The retail Red Hat Enterprise Linux 3 box set must be purchased seperately and be available when installing this SoftPaq. HOW TO USE: HOW TO USE: 1. Download the .tgz file to local hard drive. Unpack the .tgz file with 'tar -xvzf
. A .iso file will be unpacked. 2. Burn the .iso file to CDR bootable media For example, on a Linux Workstation use the 'cdrecord' utility: 'cdrecord -v -eject speed=16 dev=2,0,0' where dev= is the device address for the CD Rom burner that comes from 'cdrecord --scanbus'. 3. Insert first disc from the Red Hat box set. 4. Select the option for loading Linux which best suits your needs: - 'gui' for a custom install leveraging all RPMS needed to enable your HP hardware. WARNING: This erases your HDD and rewrites new disc partitions. - 'install' for a HP identified install leveraging all RPMS needed to enable your HP hardware as well as specific RPMS identifed to optimize your HP Workstation experience. 5. When prompted at the end of the install for additional software, insert the Driver CD you've made from this .iao 6. Continue following prompts until the operating system is sucessfully installed. Copyright (c) 2004 Hewlett-Packard Development Company, L.P.