TITLE: HP Installer Kit for Linux-Red Hat Driver Disk for Red Hat Enterprise Linux 3 U2 VERSION: Update 2 Rev. A DESCRIPTION: This package contains the HP Installer Kit for Linux - Red Hat Linux CD ISO image, as well as the .RPM file needed to enable the TG3 LAN for the listed workstation models running Red Hat Linux Enterprise Linux 3 Update 2 (U2). PURPOSE: Routine SOFTPAQ NUMBER: SP28295 SUPERSEDES: None EFFECTIVE DATE: February 15, 2005 CATEGORY: Software SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw4200: All Models HP Workstation xw6200: All Models HP Workstation xw8200: All Models OPERATING SYSTEM(S): RH Ent Linux 3 (AMD64/EM64T) RH Ent Linux 3 (x86) LANGUAGE(S): Global ENHANCEMENTS: N/A PREREQUISITES: A retail Red Hat Enterprise Linux Workstation 3 Update 2 box set must be purchased separately and must be available when installing this SoftPaq. HOW TO USE: 1. Download the .tgz file to your local hard drive. Unpack the .tgz file with 'tar -xvzf . An .iso and an .rpm component are unpacked. 2. To install the .rpm, use 'rpm -ivh .rpm'. 3. To use the .iso, burn the .iso file to CD+R bootable media. For example, on a Linux Workstation use the 'cdrecord' utility: 'cdrecord -v -eject speed=16 dev=2,0,0 filename.iso' where dev= is the device address for the CD-ROM burner that comes from 'cdrecord --scanbus'. 3. Insert disc 1 from your Red Hat Enterprise Linux Workstation (WS) 3 Update 2 box set. At the installer prompt type 'linux dd'. 4. On the next screen, select the CD-ROM drive that you are using. Insert the Red Hat TG3 Driver Disk you created into the selected CD-ROM drive. 5. Continue following prompts until the operating system is sucessfully installed. Copyright (c) 2004-2005 Hewlett-Packard Development Company, L.P.