TITLE: ATI Graphics Drivers for x86_64 Linux Workstations VERSION: 4.3.0_22.214.171.124 Rev. A DESCRIPTION: This package contains the ATI Accelerated Graphics Drivers for the listed x86_64 Linux workstations and operating systems. NOTE: These ATI drivers are built against specific XFree/Xorg versions. This driver package supports only XFree 4.3.x (Red Hat Enterprise Linux Workstation 3). PURPOSE: Recommended SOFTPAQ NUMBER: SP33192 SUPERSEDES: None EFFECTIVE DATE: July 17, 2006 CATEGORY: Driver - Graphics - ATI SSM SUPPORTED: No PRODUCT TYPE(S): Workstations HARDWARE PRODUCT MODEL(S): HP xw4200 Workstation: All Models HP xw4300 Workstation: All Models HP xw6200 Workstation: All Models HP xw6400 Workstation: All Models HP xw8200 Workstation: All Models HP xw8400 Workstation: All Models SOFTWARE PRODUCT(S): None DEVICES SUPPORTED: ATI FireGL V3100 ATI FireGL V3300 ATI FireGL V5100 ATI FireGL V7200 OPERATING SYSTEM(S): Red Hat Enterprise Linux 3 (AMD64/EM64T) LANGUAGE(S): Global ENHANCEMENTS: - Adds support for ATI FireGL V3100, ATI FireGL V3300, ATI FireGL V5100, and ATI FireGL V7200 PCI-Express Cards with the Red Hat Enterprise Linux Workstation 3 Operating System. PREREQUISITES: N/A INSTALLATION INSTRUCTIONS: 1. Download the .tgz file to a directory on your hard drive. NOTE: If the downloaded file ends in anything other then .tgz, rename the file so it ends with the extension .tgz. 2. To unpack the .tgz file at the prompt type: 'tar -xvzf' NOTE: To perform this installation, you must be the ROOT user with no X-server running (init 3). 3. To check for existing 'fglrx_...' packages, at prompt type: 'rpm -qa | grep fgl' 4. To check for packages starting with ''fire'', at the prompt type: 'rpm -qa | grep fire' 5. Remove any previous package, for example, at the prompt type: 'rpm -e fireglrx' 6. To install the new package, at the prompt type: 'rpm -ivh fireglrx-xxx.rpm' NOTE: Step 6 installs the package file onto the system, but does not configure the new driver. To configure the driver, continue with Step 7. 7. To configure the new package, execute the script by using the following command: '/opt/hp/graphics/ati/configure' NOTE: Step 7 places/builds and configures the ATI accelerated graphics module. It also moves aside any current XF86Config-4 or xorg.conf file and puts a standard ATI file in place. For more information, known issues, advanced installation options, and example X configuration files and options, see the documentation provided in this package at: '/opt/hp/graphics/ati/'. Copyright (c) 2006 Hewlett-Packard Development Company, L.P.