TITLE: HP Compaq Blade Workstation Client Image Recovery VERSION: 07.41-4.2.1 Rev. A DESCRIPTION: This package contains the tools and image needed to restore or replace the operating system image on the HP Compaq Blade Workstation Client running the HP Blade Workstation Client Embedded (OEM) Operating System. NOTE: The image contained in this package must be deployed on a 256-MB drive key (or larger). PURPOSE: Routine SOFTPAQ NUMBER: SP34507 SUPERSEDES: None EFFECTIVE DATE: January 9, 2007 CATEGORY: Software SSM SUPPORTED: No PRODUCT TYPE(S): Workstations HARDWARE PRODUCT MODEL(S): HP Compaq Blade Workstation Client: All Models SOFTWARE PRODUCT(S): None OPERATING SYSTEM(S): HP Blade Workstation Client Embedded OS LANGUAGE(S): Global ENHANCEMENTS: - Updates monitor layout nomenclature so it follows the standard convention of Width x Height. (If upgrading from an 07.XX beta, you may see X and Y swap.) - Provides smart preserve architecture to retain configuration settings through operating system updates. - Updates USB key installer screen so it now prompts for both site and local configuration settings. - Adds user settable mouse speed. - Improves audio (no clicks/pops during heavy loads). - Adds support for additional keyboards. The full list of supported keyboards includes: US English, International English, Canadian, German, Spanish, French, Norwegian, Swiss German, Swedish, UK English, UK English Extended, Finnish, Danish, Italian, and Belgian French. - Updates System Log viewer, from webmin "Other" tab (including RGS log), to work with cut and paste from any browser, anywhere. - Adds display of system information, such as hardware and software versions, when you right-click the About Menu. - Provides RGS 4.2.1 receiver. - Adds "about" information to the rc.log. FIXES: - Fixes performance issue that occurs on monitors in Portrait mode. PREREQUISITES: - 256-MB (or larger) drive key is required for image deployment. INSTALLATION INSTRUCTIONS: 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file to extract the files. NOTE: The utility contained in this SoftPaq is only to be used in the deployment of this factory image. 3. With the appropriate USB drive key plugged in, open a command window and run dskimg32.exe to obtain the drive key ID (only one drive key should be plugged in when running this program). 4. Run dskimg32.exe client_07.41-4.2.1.img. EXAMPLE: dskimg32.exe client_07.41-4.2.1.img HD3 (where HD3 is the device ID). NOTE: Be sure to use the correct disk storage device ID, because all data on the device will be replaced by the client image. 5. Start (boot) the HP Compaq Blade Workstation Client from the USB drive key and follow the on-screen instructions. Copyright (c) 2007 Hewlett-Packard Development Company, L.P.