TITLE: HP Installer Kit for Linux-HP Driver CD for Red Hat Enterprise Linux 3 Update 8 VERSION: Update 8 Rev. A DESCRIPTION: This package contains the HP Installer Kit for Linux - HP Driver CD ISO image to enable the Red Hat Enterprise Linux Workstation 3 Update 8 Box Set for the listed workstation models. PURPOSE: Routine SOFTPAQ NUMBER: SP34544 SUPERSEDES: None EFFECTIVE DATE: January 12, 2007 CATEGORY: Software SSM SUPPORTED: No PRODUCT TYPE(S): Workstations HARDWARE PRODUCT MODEL(S): HP xw4400 Workstation: All Models HP xw6400 Workstation: All Models HP xw8400 Workstation: All Models HP xw9400 Workstation: All Models SOFTWARE PRODUCT(S): None OPERATING SYSTEM(S): Red Hat Enterprise Linux 3 (AMD64/EM64T) Red Hat Enterprise Linux 3 (x86) LANGUAGE(S): Global ENHANCEMENTS: - Provides updated drivers. PREREQUISITES: - A retail Red Hat Enterprise Linux Workstation 3 Update 8 Box Set must be purchased separately and must be available when installing this SoftPaq. INSTALLATION INSTRUCTIONS: 1. Download the .tgz file to your local hard drive. Unpack the .tgz file with 'tar -xvzf . An .iso file is unpacked. 2. Burn the .iso file to CD-R bootable media. For example, on a Linux Workstation use the 'cdrecord' utility: 'cdrecord -v -eject speed=16 dev=2,0,0 filename.iso' where dev= is the device address for the CD-ROM burner that comes from 'cdrecord --scanbus'. 3. Insert disc 1 from your Red Hat Enterprise Linux Workstation (WS) box set and boot the HP Workstation. 4. When prompted at the end of the installation for additional software, insert the Driver CD that was created from the .iso file in this package. 5. Continue following prompts until the operating system is sucessfully installed. Copyright (c) 2006-2007 Hewlett-Packard Development Company, L.P.