TITLE: HP Compaq Blade Workstation Client USB Key Image Recovery VERSION: 08.41-4.2.1 Rev. A DESCRIPTION: This package contains the tools and image needed to restore or replace the operating system image on the HP Compaq Blade Workstation Client running the HP Blade Workstation Client Embedded (OEM) Operating System. NOTE: The image contained in this package must be deployed on a 256-MB drive key (or larger) using the dskimg32 tool included in this package. PURPOSE: Routine SOFTPAQ NUMBER: SP35381 SUPERSEDES: None EFFECTIVE DATE: April 5, 2007 CATEGORY: Software SSM SUPPORTED: No PRODUCT TYPE(S): Workstations HARDWARE PRODUCT MODEL(S): HP Compaq Blade Workstation Client: All Models HP dc72 Blade Workstation Client: All Models SOFTWARE PRODUCT(S): None OPERATING SYSTEM(S): HP Blade Workstation Client Embedded OS LANGUAGE(S): Global ENHANCEMENTS: - Adds support for Japanese, Latin American Spanish, and Dutch keyboards. - Integrates Active Directory in Webmin. - Makes Settings files accessible from Webmin. - Integrates Altiris DS 6.8 SP1 support and ADLagent. - Adds an option that enables the host to pass the hostname to the Dynamic Host Configuration Protocol (DHCP) server. - Adds an option for forcing analog monitor output when mixing Analog/DVI. - Adds pseudo-random hostname generation. - Modifies the partition scheme and bootloader to support Altiris. - Adds writable file system check and cleanup during boot. - Loads USB-HID after usb-remote. PREREQUISITES: - 256-MB (or larger) drive key is required for image deployment. INSTALLATION INSTRUCTIONS: 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file to extract the files. NOTE: The utility contained in this SoftPaq is only to be used in the deployment of this factory image. 3. With the appropriate USB drive key plugged in, open a command window and run dskimg32.exe to obtain the drive key ID (only one drive key should be plugged in when running this program). 4. Run dskimg32.exe client-08.41-4.2.1.img. EXAMPLE: dskimg32.exe client-08.41-4.2.1.img HD3 (where HD3 is the device ID). NOTE: Be sure to use the correct disk storage device ID, because all data on the device will be replaced by the client image. 5. Start (boot) the HP Compaq Blade Workstation Client from the USB drive key and follow the on-screen instructions. Copyright (c) 2007 Hewlett-Packard Development Company, L.P.