TITLE: HP Compaq Blade Workstation Client USB Key Image Recovery VERSION: 08.81 Rev. A DESCRIPTION: This package contains the tools and image needed to restore or replace the operating system image on the HP Compaq Blade Workstation Client running the HP Blade Workstation Client Embedded (OEM) Operating System. NOTE: The image contained in this package must be deployed on a 256-MB drive key (or larger) using the dskimg32 tool included in this package. For information about the HP Blade Workstation Client series and the features provided by Embedded Operating System (OS) Version 8.81, see the document titled "HP Blade Workstation Client series - Embedded OS Version 8.xx," which is available from either of the following websites: www.hp.com/support/bwclient_manuals www.hp.com/support/dc72_manuals PURPOSE: Routine SOFTPAQ NUMBER: SP37046 SUPERSEDES: None EFFECTIVE DATE: September 13, 2007 CATEGORY: Software SSM SUPPORTED: No PRODUCT TYPE(S): Workstations HARDWARE PRODUCT MODEL(S): HP Compaq Blade Workstation Client: All Models HP dc72 Blade Workstation Client: All Models SOFTWARE PRODUCT(S): None OPERATING SYSTEM(S): HP Blade Workstation Client Embedded OS LANGUAGE(S): Global ENHANCEMENTS: - Updates HP Remote Graphics Software (RGS) Receivers to the following versions: * RGS 4.2.5 * RGS 5.1.0 - Updates the HP Session Allocation Manager (SAM) as follows: * Includes SAM Connection Client 2.1. * Adds support for SAM settings files. * Fixes issue with DNS lookups when SAM starts. - Updates Altiris adlagent to version 2.6-38 to support Altiris Deployment Solution 6.8 SP2 and Rapid Deployment Pack 3.70. - Changes the partition layout. - Adds support for an experimental Dvorak keyboard. - Adds a Remote Power Button for blades. For GPL purposes, a source CD must be distributed with any bootable USB keys created with this software. FIXES: - Fixes resolution issues for resolutions less than 1280 x 1024. - Fixes timeout issue with Bloomberg keyboard. PREREQUISITES: - 256-MB (or larger) drive key is required for image deployment. INSTALLATION INSTRUCTIONS: 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file to extract the files. NOTE: The dskimg32.exe utility contained in this package is only to be used in the deployment of this image. To use this SoftPaq, complete the following steps: 1. With the appropriate USB drive key plugged in, open a command window and run dskimg32.exe to obtain the drive key ID (only one drive key should be plugged in when running this program). HP branded keys are recommended in order to guarantee that the image will be copied correctly. Example: dskimg32.exe Output will indicate that the USB drive key is mapped to HD*. 2. Run dskimg32.exe client-08.xx.img. Example: dskimg32.exe client-08.xx.img HD3 (where HD3 is the device ID for your drive key). NOTE: Be sure to use the correct drive key device ID, because all data on the device will be replaced by the client image. 3. Start (boot) the HP Compaq Blade Workstation Client from the USB drive key and follow the on-screen instructions. Copyright (c) 2007 Hewlett-Packard Development Company, L.P.