|Features:||ACPI, PC Health Monitoring|
L: Currently unknown
W: Currently unknown
|AT or ATX Support:||ATX power supply support.|
Intel Pentium III/Celeron CPUs up to 1.4GHz. See BIOS Notes.
|Chipset:||VIA Apollo 694T Northbridge, VIA 686B Southbridge|
|Has onboard cache:||No. This board succeeds the Socket 7 time period.|
Sound Blaster Emulation:
Yes, VIA 686B
2x IDE [Ultra DMA/100 (100MB/sec)]
|PCI and ISA Slots:||1x AGP (4x), 5x PCI, 1x CNR|
4x SDRAM DIMM
1.5GB (1536MB) RAM
|Keyboard Support:||PS/2 DIN-6 connector.|
|Has Mouse Support:||Yes, both Serial and PS/2.|
|Has USB Support:||Yes, USB 1.1|
|Has IrDA Support:||Yes|
|Connectors:||IrDA, SB-Link, Wake-on LAN, Wake-on Ring (Modem-on Ring), Front USB, Front Audio|
|BIOS Notes:||BIOS update VBD43 supports the Intel Pentium III-S 1.4GHz CPU. Previously it would hang the system at the BIOS startup screen.|
BIOS - BIOS archive for the FA15T v1.2 board. You can also download them here.
Docs - Official CPU support documents for the FA15T v1.2 board.
Drivers - Drivers regarding the FA15T v1.2 board, mostly sound drivers. Vinyl v7.00b. This should fix an annoying issue involving choppy/glitchy sound in Windows XP [which is present in the Microsoft drivers!], although it is also for earlier Windows versions. There are other sound drivers, but this is a later release. --CDPro coming soon!--
Manual - Motherboard's user manual for the FA15T v1.2 board.
Pics - Pictures of the FA15T v1.0 and v1.2 board. The v1.2 board has the speaker connector present, whilst the v1.0 does not. Otherwise, they are the same. -- Tracking the original site that had the v1.2 mainboard scan was tricky, but I finally found it: here. It is the fourth board listed there.
Utils - Different Award BIOS Flash versions for an Award-based board. This should also apply to the A-trend board on link M3 of the Tech Page section.
Web - Forum archives regarding the Intel motherboard USB header and connector. You need to read this motherboard's manual and the case's manual, if any, in order to determine the correct connections for this board, if the header follows Intel standards. This also applies if you are going to install a USB card reader that uses the Intel connector. It is clear that it does not follow Intel standards, so this may be useful to you.